Vertical Blind Track Components

Replacement Parts and Mounting Hardware

Select a category below that's relative to the part your looking for

Vertical Blind Track Components
		Brackets Carriers Controls Chain Cord	Pinion Spacers Push Nuts Re-Cording Hook Wire Tilt Controls Tension Pulleys Weighted Pulleys

To Search for a related item on this page...
Press the "Ctrl" and "F" key on your keypad at the same time to open the Find box.

Vertical Blind Tilt Controls and Ends
( 14 items listed )

Top

click to enlarge

Graber Vertical Blind Wand Control
Item # VRT-GWC2

For use with the Graber G-85 Duravue track

Price $16.35 ea ( In stock )

click to enlarge

Graber Vertical Blind Tilt Control
Item # VRT-CNT-G85
#2908

For use with the Graber G-85 Duravue and G-Lite tracks.
Includes 3-feet of chain.

Price $12.95 ea ( In stock )

click image to enlarge

Graber Vertical Blind Tilt Control
Item # VRT-CNT-G71
#2657

For use with the Graber G-71 Super-Vue track.
Uses #10 chain sold separately.

Price $15.95 ea ( In stock )

click image to enlarge

Vertical Blind Tilt Control
Item # VRT-CNT97

Used on standard 8-prong pinion tracks with a 1-15/16" wide notched head-rail like the one shown on the top in the photo to the right.
This control will replace item # VRT-CNT8
Uses #10 chain sold separately.

click image to enlarge

Vertical Blind Tilt Control and Return
Item # VRT-CNT97-RN

Used on 8-prong pinion tracks with a 1-15/16" wide notched head-rail.
See the difference between Notched and Notch-less head-rails here.
This control will replace item # VRT-CNT8-RN
Uses #10 chain sold separately.

click image to enlarge

Vertical Blind Tilt Control and Return
Item # VRT-CNT8-RN

Used on standard 8-prong pinion tracks with a 1-15/16" notched head-rail.
See the difference between Notched and Notch-less head-rails here.
Uses #10 chain sold separately.

click image to enlarge

Vertical Blind Tilt Control
Item # VRT-CNT25

Used on standard 8-prong pinion tracks with a 1-15/16" notch-less head-rail.
See the difference between Notched and Notch-less head-rails here.
Uses #10 chain sold separately.

click image to enlarge

Vertical Blind Tilt Control and Return
Item # VRT-CNT25-RN

Used on standard 8-prong pinion tracks with a 1-15/16" notch-less head-rail.
See the difference between Notched and Notch-less head-rails here.
Uses #10 chain sold separately.

click to enlarge

Vertical Blind Reversible Tilt Control with Return
Item # VRT-CNT-200

Used on standard 3-prong pinion tracks with a 1-15/16" head-rail.
Reversible design to use on either side.
Comes with end-covers and two push nuts.
Uses #10 chain.
Bulk-Ordering available.

click to enlarge

Profile / Laserlite Vertical Blind Tilt Control with Return
Item # VRT-CNTLL2

Used on certain Laserlite tracks.
Comes with two push nuts.
Uses #6 chain.
(size) (inside view)
Related item: Carriers, Replacement Stems. Spacers

click to enlarge

Profile / Laserlite Vertical Blind Tilt Control
Item # VRT-CNTLL36

Used on certain Laserlite tracks.
3-piece unit
Uses #6 chain.

click to enlarge

Profile / Laserlite Vertical Blind Tilt Control
Item # VRT-CNTLL44

Used on certain Laserlite tracks.
4-piece unit
Uses #8 chain.

Not sold in pairs

click to enlarge

Profile / Laserlite Vertical Blind End Cap
Item # VRT-LLCAP1

Used on many Laserlite tracks.

Louverdrape Vertical Blind Tilt Control
Item # VRT-CNT-LD4

2 piece gear and control.
For 3-prong pinion tracks with a 1-1/8" headrail.
Uses #6 chain.

Not sold in pairs

Louverdrape Vertical Blind End Cap
Item # VRT-LDCAP4

Used in conjunction with VRT-CNT-LD4 above.

Vertical Blind Track Components
( 5 items listed )

Top

click to enlarge

Vertical Blind Track Pinion Rod Spacers
Item # VRT-SPCR3

Used on 3 and 4 prong Pinions.
These Spacers attach to the Pinion rod inside the track.
Used to adjust the overlap on center-open tracks and adjust the spacing at either end.

Spacers sold separately

Vertical Blind Track Pinion Rod Spacers
Item # VRT-SPCR8

Used on 8-prong Pinions.
These Spacers attach to the Pinion rod inside the track.
Used to adjust the overlap on center-open tracks and adjust the spacing at either *end.
* Control end requires a 3/4" spacer on most tracks.

click to enlarge

Push Lock Nuts
Item # VRT-PSH2

Used on 3 and 4 prong tracks.

click to enlarge

7" Cord Threading Hook-Wire
Item # HOK-WR7

Multi purpose, most commonly used for threading horizontal blinds and certain shades.
Each hook is hand made from high tempered stainless steel wire.

click image to enlarge

24" Cord Threading Hook-Wire
Item # HOK-WR2

Multi purpose, commonly used to thread cord through vertical blind carriers.
Each hook is hand made from high tempered stainless steel wire.

Top